
Top Features at a Glance
- Electric dab rig shaped like a straight tube bong
- Thick borosilicate glass with a showerhead percolator
- Pivoting atomizer manifold that keeps your dab upright as you lean back
- Coil-less quartz cup atomizer with glass collar and carb cap
- Two quartz terp pearls plus a Terp Tong for easy handling
- Five temperature settings from 482°F to 842°F
- Sesh Mode and Manual Mode with haptic feedback
- Powerful 3,200mAh battery with USB-C charging
About the Pulsar APX eRig
The Pulsar APX eRig is an electric dab rig built to look and hit like a real glass bong. It stands just over 10.5 inches tall and is made largely of ultra-thick borosilicate glass. Inside the base, a smoky glass downstem leads into a circular showerhead percolator that spreads vapour through the water in every direction for smooth, cool hits.
What makes the APX eRig different is its pivoting atomizer manifold. Where a normal rig has a fixed joint, the APX has a manifold that swivels. You can lean back and tilt the rig while the atomizer stays upright, so your concentrate stays pooled evenly on the heated quartz instead of running to one side. Two quartz terp pearls spin inside the cup to stir your concentrate as it melts, and the included Terp Tong lets you place and remove them without taking anything apart.
Power comes from a 3,200mAh battery, the biggest Pulsar has put in a vaporizer. Choose from five temperatures with the control button, then use Sesh Mode for a hands-free heat cycle or Manual Mode to finish off any leftover concentrate. LED lights around the button and underneath the rig change colour with each setting and glow while you dab.
Specs
- Device Type: Electric dab rig (e-rig)
- Released: 2024
- Battery: 3,200mAh, built in
- Atomizer: Coil-less quartz cup with glass collar and carb cap
- Temperature Settings: 482°F, 572°F, 662°F, 752°F, 842°F (250°C to 450°C)
- Modes: Sesh Mode and Manual Mode
- Percolator: Circular showerhead
- Glass: Ultra-thick borosilicate
- Terp Pearls: 2x quartz, 6mm
- Airpath: Removable stainless steel
- Feedback: Haptic plus LED light ring
- Safety: Auto shut-off
- Charging: USB-C
- Height: 10.5 inches
- Warranty: 1-year Pulsar warranty
What's Included in the Box
- 1x APX eRig with Pivoting Atomizer Manifold
- 1x Coil-less Quartz Cup Atomizer
- 1x Removable Airpath Tube
- 1x Glass Mouthpiece
- 1x Glass Base Jar
- 1x Glass Downstem
- 1x Glass Coil Collar
- 1x Glass Carb Cap & Silicone Tether
- 2x Quartz Terp Pearls
- 1x Terp Tong
- 1x Silicone Mat
- 1x Stainless Steel Dab Tool
- 1x USB-C Charging Cord
- 2x Replacement O-Rings
- 4x Alcohol Swabs
- 1x Cleaning Brush
Buy the Pulsar APX eRig in Canada
Canadian Vaporizers is an authorized Pulsar dealer, so every APX eRig we sell is genuine and covered by Pulsar's warranty. Orders over $99 ship free from our warehouses across Canada, and every order arrives in discreet packaging.
Browse more Pulsar vapes and accessories.
Everything Else You Need to Know About the Pulsar APX eRig
Build Quality and Materials
The APX eRig feels substantial. The glass is thick borosilicate, the base is wide and stable on a table, and the mouthpiece has a wide rim for a good seal. The quartz atomizer sits inside a glass collar with a tethered carb cap, so the cap won't wander off. The stainless steel airpath slides out of its silicone housing for cleaning, and Pulsar includes spare O-rings in the box.
How does it work?
- Charge the APX eRig fully with the included USB-C cable.
- Fill the glass base jar with water, insert the downstem and attach the mouthpiece.
- Screw the quartz atomizer into the manifold and put on the glass collar.
- Press the control button five times to turn it on.
- Press three times to cycle through the five temperature settings.
- Load your concentrate into the quartz cup and drop in the terp pearls with the Terp Tong.
- Press twice to start Sesh Mode. The lights pulse while it heats, then go solid with a vibration when it's ready.
- Cover the cup with the carb cap and inhale.
- Use Manual Mode (press and hold) to finish off any leftover concentrate.
Pros and Cons
Pros
- Looks and hits like a real glass rig
- Pivoting manifold keeps your dab upright as you tilt
- Showerhead percolator for smooth, cool hits
- Quartz cup and terp pearls for even vaporization
- Huge 3,200mAh battery
- Packed with accessories, including a Terp Tong and spare O-rings
Cons
- Large and mostly glass, so it's a home rig rather than a portable one
- Presets instead of precise temperature control
- The highest settings run very hot for most concentrates
Temperature Settings
The APX eRig has five presets, colour-coded from blue and green for the lower settings to purple and red for the highest:
- 482°F (250°C): The best flavour. Ideal for live resin and terp-rich concentrates.
- 572°F (300°C): A balance of flavour and vapour.
- 662°F (350°C): Big clouds with good flavour.
- 752°F and 842°F (400°C and 450°C): Heavy, hot rips with much less flavour.
Most people get the best results from the lower two or three settings. Start at 482°F and step up only if you want bigger clouds.
Features That Stand Out
The pivoting manifold solves a common e-rig problem. On most rigs, tilting the device while you inhale makes your concentrate slide to one side of the cup. On the APX, the atomizer stays level no matter how you hold the rig. Add the spinning terp pearls and the showerhead percolator, and you get even vaporization and smooth, water-cooled hits that feel like a traditional dab rig.
Cleaning and Maintenance
- After each session, let the rig cool and wipe out the quartz atomizer with a cotton swab dipped in isopropyl alcohol.
- Use the Terp Tong to remove the terp pearls, and soak them in alcohol as needed.
- For a deep clean, take the rig apart and soak the glass parts in isopropyl alcohol, then rinse well.
- Pull the stainless steel airpath out of its silicone housing, soak it in alcohol and clear any clogs with the included brush.
- Swab the atomizer threads and connection.
- Let everything dry completely before putting it back together.
Change the water often for the best flavour.
Flavor and Cloud Performance
The coil-less quartz cup and terp pearls give clean, even vaporization, and the lower settings bring out excellent flavour. The showerhead percolator cools the vapour well, so even big hits stay smooth. With its large battery and higher temperature options, the APX eRig can deliver heavy clouds when you want them.
Where This Fits in Your Setup
The APX eRig is a great choice if you want a glass dab rig experience without a torch. It's built for home sessions and sharing with friends. If you'd rather have something smaller and more portable, look at the Pulsar Dabtron 2.0 or the Pulsar Chorus.
Warranty
The Pulsar APX eRig comes with a 1-year warranty from Pulsar. Glass and atomizers aren't covered. Since we're an authorized dealer, we can help with any warranty questions.
FAQs
How do I use the Pulsar APX eRig?
Fill the base with water, assemble the rig and press the button five times to turn it on. Press three times to choose your temperature, load your concentrate and terp pearls, then press twice to start Sesh Mode. Inhale when it vibrates.
What are the temperature settings on the APX eRig?
It has five settings: 482°F, 572°F, 662°F, 752°F and 842°F.
What is Sesh Mode on the Pulsar APX eRig?
Sesh Mode is a hands-free heat cycle. Press the button twice and the rig heats up, vibrates when it's ready and stays hot through your session. Manual Mode lets you hold the button to heat on demand.
Is the APX eRig the same as the Pulsar APX vaporizer?
No. The Pulsar APX vaporizers (like the APX V3) are dry herb vaporizers. The APX eRig is an electric dab rig made for wax and other concentrates.
How do I clean the APX eRig?
Swab the quartz atomizer with isopropyl alcohol after each session. For a deep clean, take the rig apart, soak the glass and the stainless steel airpath in alcohol, then rinse and let everything dry.
Where can I buy the Pulsar APX eRig in Canada?
Right here at Canadian Vaporizers. We're an authorized Pulsar dealer with warehouses across Canada.

